Mercury 500 50hp 77 model

herbGayheart

Recruit
Thread starter
Joined
Dec 1, 2010
Messages
2
All

Just joined looking for help with the wiring on my 77 mercury 50 horse engine..

The insulation on the wiring going to the trigger mechanism has disintegrated to the point that I cannot identify color codes...I have repaired the wires with new but cannot identify colors ...With an ohmmeter, I can identify the two wires and to which coil they connect.( I move a magnet back and forth over the coil and watch the volt meter ) Knowing which coil is which gives me two chances to hook them to the cdi box correctly...However which coil serves which two connectors on the cdi box..? Given clockwise rotation looking down on the flywheel, I would call the one most ccw as coil 1 and the following coil...90 degrees cw, as coil 2..

Secondly...am I to assume that the coils are charged from the magnets on the inner periphery of the flywheel? I see no others... Also do I assume that the firing occurs when a magnet of opposite polarity passes or that the field collapses because of a missing magnet...? Thanks Herb
 
Top