mercury 110 9.8 problems

ionroller

Recruit
Joined
Sep 8, 2010
Messages
3
My 197? guessing 78 mercury 110 9.8 with thunderbolt ignition will start up fine and run, but wont get on the power band.

It will push my 12 foot duck boat slower than i can swim..

In a tank in gear it runs like a champ and revs all the way up, but in the water it wont take full throttle, it just bogs out so you have to run half throttle...

Any ideas?

i have cleaned carb and fuel pump, fresh 50:1 mix, new champion plugs, good spark with light tester, squeezing bulb didn't help, good compression?
 

62larkowner

Seaman
Joined
Jul 29, 2009
Messages
64
Re: mercury 110 9.8 problems

i recently aquired a mercury 110 9.8 hp around a 1972 model its on a 14ft flatbottom having about the same problem, ran great in barrel but not worth a dang in lake, did u ever get yours running right?
 
M

Maxz695

Guest
Re: mercury 110 9.8 problems

in a barrel there is no load on the lake it has alot of load>Check the compression
 

62larkowner

Seaman
Joined
Jul 29, 2009
Messages
64
Re: mercury 110 9.8 problems

alright thanx for the advice, for that size motor what should compression be?
 

bktheking

Vice Admiral
Joined
Jul 29, 2008
Messages
5,057
Re: mercury 110 9.8 problems

Is it firing on both cylinders, sounds like maybe it isn't??? I've pulled over a 100psi on those motors both plugs out.
 
Top