bengaltiger14
Seaman Apprentice
- Joined
- May 14, 2012
- Messages
- 48
Hello everyone. As my title suggests, I have a 2005 Sea Ray with 5.0L MPI Bravo 3. For the past year, I have had a problem with the engine not heating up. In the middle of the Summer, the engine temp would rise to maybe 115 degrees. I verified the operation of the thermostat and even replaced it even though it test good. I did, however, replace the impeller and after idling in the water for 10 minutes, the engine got very hot and actually set off the high temperature alarm. Both the digital and analog gauges indicated high temperature as expected. I fixed this problem.
I can touch the engine manifolds with my hands after hours of operation and it does not feel very warm. It feels like about what the gauges are indicating. Any other ideas or suggestions?
I can touch the engine manifolds with my hands after hours of operation and it does not feel very warm. It feels like about what the gauges are indicating. Any other ideas or suggestions?
Last edited: