Mercruiser Alpha One shift shaft shuffle

sterndale

Cadet
Thread starter
Joined
Jul 29, 2005
Messages
7
Drive unit response to remote shift lever became erratic yesterday. Found that the intermediate shift shaft had dropped down away from the shoe (where drive unit links up with gimbal. etc). Intermediate shift shaft has about 1/2" or more of axial play, can drop down and disengage from shoe. Everything else seems fine, works normally if shaft is up where it belongs. Boat still in water, assessment down by touch and feel.

What happened?
 

Don S

Honorary Moderator Emeritus
Joined
Aug 31, 2004
Messages
62,321
Re: Mercruiser Alpha One shift shaft shuffle

What year Alpha, and did you have the drive apart for any repairs, like Impellers replacement??
 

Bt Doctur

Supreme Mariner
Joined
Aug 29, 2004
Messages
19,563
Re: Mercruiser Alpha One shift shaft shuffle

If it was recently worked on there`s a good chance the SS washer is missing from the splined shaft.This washer sets the height for the shoe. without it the shoe drops down too far.
 

djvan

Chief Petty Officer
Joined
May 3, 2003
Messages
411
Re: Mercruiser Alpha One shift shaft shuffle

Ditto Bt Doc

DougV>
 

sterndale

Cadet
Thread starter
Joined
Jul 29, 2005
Messages
7
Re: Mercruiser Alpha One shift shaft shuffle

Bt said:
If it was recently worked on there`s a good chance the SS washer is missing from the splined shaft.This washer sets the height for the shoe. without it the shoe drops down too far.
 

sterndale

Cadet
Thread starter
Joined
Jul 29, 2005
Messages
7
Re: Mercruiser Alpha One shift shaft shuffle

It's a 1988. The impeller was replace last summer. It's possible that the washer has been missing since then and the problem just showed up. (Maybe 20 hours run time since impeller).

Thanks for advice.
 
Top