hamelrider
Recruit
- Joined
- Jul 11, 2014
- Messages
- 2
She's only running on the top cylinder. When i take off no 3 plug wire, no difference in rpm's. Take off wire from #2, and again, no rpm drop. Take off no 1 and it kills. So, figured carb problems. Took off all three and cleaned. Replaced. Same deal.
For grins i would just have a wire to top cylinder and, naturally, it started and ran. Then i would only have a wire to the middle plug and to my surprise, it started and ran. Then i would only hook up the bottom cylinder and low and behold, it started and ran. So. . .this eliminates plugs (which are now new), carbs, cylinders and plug wires. So now I'm thinking whatever produces spark only has enough oomph to power one plug adequately? Is that a possibility? Or. . . .thoughts?
For grins i would just have a wire to top cylinder and, naturally, it started and ran. Then i would only have a wire to the middle plug and to my surprise, it started and ran. Then i would only hook up the bottom cylinder and low and behold, it started and ran. So. . .this eliminates plugs (which are now new), carbs, cylinders and plug wires. So now I'm thinking whatever produces spark only has enough oomph to power one plug adequately? Is that a possibility? Or. . . .thoughts?