Manual Tilt

futur49

Cadet
Thread starter
Joined
Oct 22, 2017
Messages
6
Hi everyone. I'm new to this forum and also new to boating. Last summer I bought a 1977 starcraft runabout that came with an 1973 evinrude 85hp. Been fixing it up with the help of Google n forum post I read here n there. I'm also a cabinet maker so my knowledge of wood and little fiberglass exp'helps a bit. To get to the point I have a newbie question please. The motor that came with my boat does not have a power tilt. It is manual so my question is where the heck is the lever to release my motor so I can tilt the damn thing? Thanks in advance.
 

racerone

Honorary Supreme Mariner
Joined
Dec 28, 2013
Messages
40,028
On the port side of the motor there should be a lever.----Has a black knob on it .---Says ---Tilt / run on it.-----Or at least it had that when it left the factory.
 

futur49

Cadet
Thread starter
Joined
Oct 22, 2017
Messages
6
Ok I'll check. Hopefully its there otherwise I'll be asking for more help.
 

F_R

Honorary Supreme Mariner
Joined
Jul 7, 2006
Messages
28,226
Swing the lever up to release and tilt it. Swing it down and give the motor a slight tug up, then lower it down to run it. Looking at it from inside the boat, it should say "tilt" or "run" accordingly. Before you ask, run it in locked-down position. It WILL automatically unlock and release if you whack an underwater object.
 
Top