ciscokidd
Petty Officer 2nd Class
- Joined
- Aug 22, 2012
- Messages
- 145
Looking for the replacement part numbers so I can start collecting manifolds and risers for my 2000 250SE. I reside in Canada BC West Coast, can not access the Volvo Penta online store due to region.
When replacing the manifolds and risers what else should one consider. I do not yet need to do mine but I am thinking to do over the winter or spring 2016. However I would like to start collecting the parts for the job. Motor is 5.7GS. Currently about 600 hrs on this engine. Entering 3rd year in the chuck 24/7, no signs of leaking or any corrosion and I replaced the riser gaskets at 500 hours, everything looked very good at that point as boat had been in fresh water about 6 mth a year since 2001. Since put into the chuck in 2013 I have been using Neutra Salt system religiously
PM's are appreciated w links to suppliers of original parts . not sure of total cost I can expect in parts so would like to start looking at this.
When replacing the manifolds and risers what else should one consider. I do not yet need to do mine but I am thinking to do over the winter or spring 2016. However I would like to start collecting the parts for the job. Motor is 5.7GS. Currently about 600 hrs on this engine. Entering 3rd year in the chuck 24/7, no signs of leaking or any corrosion and I replaced the riser gaskets at 500 hours, everything looked very good at that point as boat had been in fresh water about 6 mth a year since 2001. Since put into the chuck in 2013 I have been using Neutra Salt system religiously
PM's are appreciated w links to suppliers of original parts . not sure of total cost I can expect in parts so would like to start looking at this.