Manifold Help

[Spider011]

Hello all,
I am currently building a motor it is a 2.5L 120 Mercruiser from 1964-1972. It has a Rochester Carb. The Intake listed is MC-1-63122 or 63122A14. My question is can I put the MC-1-95862 intake on it. Both are 6 bolt so I do not see an issue with it however I was wondering if anyone has tried this. The reason for attempting this is I need the 45 degree riser for the new boat that I am building and I just spent a lot of money rebuilding this block and head. Thoughts???

 

[ROY WILLIAMS]

Hello all,
I am currently building a motor it is a 2.5L 120 Mercruiser from 1964-1972. It has a Rochester Carb. The Intake listed is MC-1-63122 or 63122A14. My question is can I put the MC-1-95862 intake on it. Both are 6 bolt so I do not see an issue with it however I was wondering if anyone has tried this. The reason for attempting this is I need the 45 degree riser for the new boat that I am building and I just spent a lot of money rebuilding this block and head. Thoughts???

Mercruiser 2.5L & 3.0L w/ Rochester Carb - NO Choke Stove

New Barr Marine exhaust/intake manifold. Direct replacement exhaust manifold for use with a Rochester carburetor (3 1/4" x 1 7/8") with NO choke stove. 6 hole bolt pattern. Used frequently in pre-1990 applications. All components made in th

www.michiganmotorz.com

 

[Spider011]

Mercruiser 2.5L & 3.0L w/ Rochester Carb - NO Choke Stove

New Barr Marine exhaust/intake manifold. Direct replacement exhaust manifold for use with a Rochester carburetor (3 1/4" x 1 7/8") with NO choke stove. 6 hole bolt pattern. Used frequently in pre-1990 applications. All components made in th

www.michiganmotorz.com

Thanks Roy, That is what I thought in all the research that I have been doing I just had not fount that site that said that. Thank you so much

 

[Bondo]

My question is can I put the MC-1-95862 intake on it. Both are 6 bolt so I do not see an issue with it however I was wondering if anyone has tried this.

Ayuh,..... Welcome Aboard,..... If all the bolt holes line up' it oughta work just fine,....

If you need the choke stove, just convert the carb to an electric choke,.....

 

[Spider011]

Ayuh,..... Welcome Aboard,..... If all the bolt holes line up' it oughta work just fine,....

If you need the choke stove, just convert the carb to an electric choke,.....

Thanks

 

[Spider011]

Thanks

So I found MC-1-96705 it is the same but has the choke stove.