Bdoyle0075
Cadet
- Joined
- Sep 7, 2010
- Messages
- 19
Hello all,
I have a 1995 Evinrude 130 HP. I recently removed my lower unit due to water getting in. I changed the shaft seals and the water pump. Pressure test showed I fixed that problem. Now on to the problem, the reinstall was a bite hard but I got it back together. Now it will not shift. It is stuck in reverse. I have tried manually and with the shifter. Any Ideas?
I have a 1995 Evinrude 130 HP. I recently removed my lower unit due to water getting in. I changed the shaft seals and the water pump. Pressure test showed I fixed that problem. Now on to the problem, the reinstall was a bite hard but I got it back together. Now it will not shift. It is stuck in reverse. I have tried manually and with the shifter. Any Ideas?