Lower/store Bimini on Doral 250 SE

J

JimCr

Cadet
Joined
Jul 18, 2023
Messages
8
I just installed a new Bimini frame for 250SE. It was missing when I got the boat. Convertex made a new one, and I installed it today. All is good, but I have a question on how to lower/store the rear Bimini. Is there a video of how to do this? I do have all of the canvas. On piece looks like it surrounds the arc to store the top. Any help would be appreciated.
 

Attachments

  • IMG_2104.jpg
    IMG_2104.jpg
    2.6 MB · Views: 11
C

crazy charlie

Vice Admiral
Joined
May 22, 2003
Messages
5,501
Hard to tell by the pic but typically you should be able to undo/unzip the top from the supports and wind it around either the front rail or the rear rail and put a boot on it and zipper it away till u need it again.A boot is a storage cover typically with a zipper or velcro to close up the cover.Charlie
 
J

JimCr

Cadet
Joined
Jul 18, 2023
Messages
8
Thanks, that sounds right. I do have the boot with the canvas pieces.
 
J

JimCr

Cadet
Joined
Jul 18, 2023
Messages
8
Also... What is the smaller prop on the frame brace closest to the front for? It's currently folded into the retainer.
 
J

JimCr

Cadet
Joined
Jul 18, 2023
Messages
8
OK, I just watched a video showing the frame in storage position. I see where the small frame props go. Thanks
 
You must log in or register to reply here.
Top