FORUM RULES UPDATED - The forum rules have been updated to continue to provide a friendly and safe environment for our member community. Please take a moment to review the updated rules and our terms of use and privacy policy. Click here for Forum Rules which has links to the 'terms of use' and 'privacy policy'.
In Other News . . .
You will notice a few enchancements to the forums to make your experience better. These include: Email Notifications, Thread Previews, Thread Starter Notation, and Emoji Options on the 'Like' icon. . .
Additionally, the merchant portions of the website have been updated and are now operational. . . . Check out iBoats for all your boating gear.
All the 85/90 and 120/125 150 came with 20 and 25" shafts.
The 85125 was made through 1989 then they made a 90/120
The lower units to 1993 will swap just make sure before you buy.
The later 94/5 90 120 won't work on the older motors.
Include the year, model and closeup pics of the ones you want to swap.
Thanks Jerry. To measure the inch shaft to make sure if it is 20 or 25", is that the driveshaft (with a long bar) from the top to the gear housing cover? Sorry I am new to this. I wish I can attach the picture, but now allowing it.
Measuring the shaft.
From the top of the shaft to the base of the water pump.
Should measure 20 or 25
After 91 they used an adaptor and all the lowers were the same the change was in the size of the drive shafts.
