- Joined
- Mar 8, 2009
- Messages
- 42,213
Have an issue for 2 seasons with a propane vented gas log set. Posting this so others might find and help out. Found one thread which had same issue but there was no conclusion as what was the fix.
Issue: The fireplace works fine in manual control, but switch to Auto and flame increases and does not shut off. Indoor temp is 68* and control is set to 50* and flame does not turn off
I have a 6V power supply providing power to control unit (4 each AA Bats not installed)
Contacted Lopi/Travis
Manufacture says it's most likely the remote. Bought new remote 250-03764 and $169.94 later and this changed nothing.
Have now ordered control unit 250-03765 ($183.94) and await for it to arrive
Issue: The fireplace works fine in manual control, but switch to Auto and flame increases and does not shut off. Indoor temp is 68* and control is set to 50* and flame does not turn off
I have a 6V power supply providing power to control unit (4 each AA Bats not installed)
Contacted Lopi/Travis
Manufacture says it's most likely the remote. Bought new remote 250-03764 and $169.94 later and this changed nothing.
Have now ordered control unit 250-03765 ($183.94) and await for it to arrive
Last edited: