Loose flywheel magnets

Keyboardman

Petty Officer 1st Class
Joined
Sep 10, 2015
Messages
360
Hi Guys, I Found 4 out of 6 magnets loose on the flywheel of my Evinrude 200. Is there an aftermarket epoxy like JB weld that's suitable for the repair? What to do about the remaining two magnets that are still attached? I've tried tapping on them but they are still adhered well. I don't want to risk breaking them trying to get them loose but, what' to say the factory glue on them wont fail anytime soon? I understand there are some kind of retainers that can be retro fitted to hold them in place? Anyone have any experience using them? Thanks.
 

Attachments

  • thumbnail_20230608_180238.jpg
    thumbnail_20230608_180238.jpg
    334.2 KB · Views: 3

Crosbyman

Vice Admiral
Joined
Nov 5, 2006
Messages
5,443
see comments from the ETEC search utility....JB weld worked for one user but
General consensus seems to be to buy a used FW



read somewhere it was critical to orient magnets N/S poles
 
Last edited:

Keyboardman

Petty Officer 1st Class
Joined
Sep 10, 2015
Messages
360
see comments from the ETEC search utility....JB weld worked for one user but
General consensus seems to be to buy a used FW



read somewhere it was critical to orient magnets N/S poles
Looks like the E tec flywheel has about 18 little magnets around it where my older 1996 model has just 6 larger ones.
 
Top