Looking for Parts OMC I/O stern drive

[10tontractor]

New here: 10tontractor

Need a little help with the site directions for OMC 400 (140hp eng) I/O sterndrive
Transome seals 1979 MFG 1710 BR
Also looking for parts for engine (hoses)

Thank you.

 

[HT32BSX115]

Re: Looking for Parts OMC I/O stern drive

New here: 10tontractor

Need a little help with the site directions for OMC 400 (140hp eng) I/O sterndrive
Transome seals 1979 MFG 1710 BR
Also looking for parts for engine (hoses)

Thank you.

Howdy,


Welcome aboard!

I cannot suggest the best place to find a transom seal other than Doug Russell, Crowley Marine www.crowleymarine.com/omc_parts.cfm , Boats.net http://www.boats.net/parts/search/OMC/SternDrive/parts.html , And other internet sources.

They'll usually have the aftermarket OMC parts that are still being made. Some places still have OEM parts collecting dust on the shelf but they're getting pretty scarce.....

For the old formed hoses on any OMC sterndrive engine, if you can't get them from the above places or the NAPA (marine) catalog etc, you'll have to scrounge other hoses that are either close enough to work or cut and splice hoses to work and/or make your own.


That's just the way it is with obsolete "stuff" From Obsolete Marine Corp!


Sorry about that!


Rick

 

[superbenk]

Re: Looking for Parts OMC I/O stern drive

They're available right here on iBoats. You need a 22-hole version for yours.

 

[07caddy]

Re: Looking for Parts OMC I/O stern drive

Obsolete Marine Corp (OMC)

Good times!

 

[HT32BSX115]

Re: Looking for Parts OMC I/O stern drive

Good times!

Yeah, it is the PITS unfortunately....

 

[10tontractor]

Re: Looking for Parts OMC I/O stern drive

Howdy,


Welcome aboard!

I cannot suggest the best place to find a transom seal other than Doug Russell, Crowley Marine www.crowleymarine.com/omc_parts.cfm , Boats.net http://www.boats.net/parts/search/OMC/SternDrive/parts.html , And other internet sources.

They'll usually have the aftermarket OMC parts that are still being made. Some places still have OEM parts collecting dust on the shelf but they're getting pretty scarce.....

For the old formed hoses on any OMC sterndrive engine, if you can't get them from the above places or the NAPA (marine) catalog etc, you'll have to scrounge other hoses that are either close enough to work or cut and splice hoses to work and/or make your own.


That's just the way it is with obsolete "stuff" From Obsolete Marine Corp!


Sorry about that!


Rick

Thanks Rick. That is helpful. I've been learning to cruise this site also and it has a lot of great info on varios boats. Read on the history of MFG boats.. great stuff!

 

[10tontractor]

Re: Looking for Parts OMC I/O stern drive

They're available right here on iBoats. You need a 22-hole version for yours.

Thank You Sir. Think I found it. Stuff's for my Bro-in-law who is not user friendly with the computer. :redface:

 

[10tontractor]

Re: Looking for Parts OMC I/O stern drive

Ain't the most common boat still afloat, is it.??