Kohler generator overheat issues?

CurrentObsession

Petty Officer 1st Class
Joined
Aug 26, 2011
Messages
235
1999 kohler 7.3e

Overflow bottle on the side goes from empty to full back to empty within minutes of running and shutting down.

Recently installed new impeller and coupling and radiator cap. Removed and confirmed the thermostat opens at 165 degrees and the heat exchanger is flowing well. Replaced antifreeze with new 50/50 premix.

Mechanic I spoke with says there is a pressure relief cap on top of the unit that helps burp the coolant and even showed me one in his shop but my unit does not have anything similar that I can find.
 

Attachments

  • IMG_0008.png
    IMG_0008.png
    6.5 MB · Views: 7
  • IMG_7880.jpeg
    IMG_7880.jpeg
    2.7 MB · Views: 7
  • IMG_7879.jpeg
    IMG_7879.jpeg
    2.5 MB · Views: 7

Grub54891

Admiral
Joined
Jun 17, 2012
Messages
6,090
Well, your cap is pretty rough looking. I’d replace that. All the ones I’ve worked on had a small plug that you had to take out on that raised area to burb any remaining air out of the tank. In my opinion, poor design. If it wasn’t burped the set would shut down.
 

km1125

Chief Petty Officer
Joined
Aug 10, 2016
Messages
515
Have you used an IR gun on the motor to see how hot its actually getting before it shuts down? And is it shutting down itself, or is that when you shut it down when you're done using it?
 
Top