Johnson1999, 225hp Trim Sending Unit

huantres

Recruit
Thread starter
Joined
Jan 31, 2013
Messages
2
Hi there:the actuator arm of the trim sending unit broke off. As it is an important part of the whole unit I would like to take no chances in ordering a replacement. Does any one have the same motor as mine that would be kind enough to send me a picture of the actuator arm ?. My motor is Johnson J225HPLEEN model year 1999. Thank you very much.
 

Chris1956

Honorary Supreme Mariner
Joined
Mar 25, 2004
Messages
29,330
The crowleymarine site will supply an OEM part number for exact replacement.

On a related point, I have never found a trim gauge to be useful. I found it far better to trim by sound of the motor and feel of the boat. Normally you want light settring and max speed. Simply trim up until those are achieved.

I replaced my trim gauge with a water pressure gauge. Much more useful IMO.
 

huantres

Recruit
Thread starter
Joined
Jan 31, 2013
Messages
2
Thank you very much Chris1956. Question is that in the past I have received supposed original parts that did not fit. Even from authorized dealers. On the other hand, all the gauges and instrumentation in my boat are working properly, just as new when I bought the boat and would like to keep this condition as long as possible. Regards for all.
 
Top