Johnson TN-28 5hp Carb Question

Ten-X

Recruit
Thread starter
Joined
Mar 23, 2017
Messages
5
I've been trying to get an old Johnson TN-28 running. After dismounting the carb I noticed a butterfly valve where the carb meets the intake. How does this work? It looks like a choke, but since there's no manual choke I couldn't figure it out. When I mounted the carb back onto the engine I reconnected the linkage but what does it connect to? Does it have anything to do with the throttle? Thanks in advance.

Keith
 

wrench 3

Commander
Joined
Aug 12, 2012
Messages
2,108
It sounds like your describing the throttle plate. It should have a link going to a lever (possibly with a roller on it) That rides on a cam on the ignition timing plate. It won't make any contact with it until the hand lever is about half way across its travel.
 
Top