Johnson Starter Problem

deltasoultoad

Recruit
Thread starter
Joined
Jul 14, 2017
Messages
1
OK, starter runs, gear goes up, doesn't engage flywheel all the way, make horrific noise. Someone on another forum said solenoid, replaced that, same problem (down $40 and 1 hour work). What next? Got video of problem. Will post soon. Thanks in advance! (motor is a 198? Johnson28)
 

southkogs

Moderator
Staff member
Joined
Jul 7, 2010
Messages
15,134
Welcome aboard:

I moved you out of the cartoons section into Johnson outboards to see if we can get something rolling for you.

Flywheel and starter are both in the right position? No teeth missing?
 

racerone

Honorary Supreme Mariner
Joined
Dec 28, 2013
Messages
40,028
Load test the battery.---Take starter apart and inspect brushes.
 

F_R

Honorary Supreme Mariner
Joined
Jul 7, 2006
Messages
28,226
That problem almost always is the starter isn't running fast/suddenly enough. Check battery, battery cables. Do some voltage tests. However, with the noise comment, I'd suggest the starter gear or flywheel gears might be badly worn or damaged.
 

Joe Reeves

Supreme Mariner
Joined
Feb 24, 2002
Messages
13,262
You say it makes a horrific noise (the bendix?), if so... and if the starter armature is turning inside of the bendix gear, replace the bendix.
 
Top