Johnson RDSL-23 (1961) Engine won't Start

comrad.12357

Cadet
Thread starter
Joined
Jul 8, 2012
Messages
8
Ok, I have a Johnson Electric Seahorse 40hp that I have pulled out of storage after 25 years. After we unfroze the engine we replaced the impeller, and then fixed a problem with one of the pistons not firing, but now when trying to start it there is a loud POP, and then the engine becomes impossible to even turn the flywheel.

Things that have been done:
  • Timing Checked
  • Fuel Diaphragm Replaced
  • Engine Well Lubricated
  • All Wiring Redone

Also during the most recent attempt to start the engine some fuel was jettisoned from the carb.

Thanks for any help.
 

tx1961whaler

Vice Admiral
Joined
May 31, 2008
Messages
5,197
Re: Johnson RDSL-23 (1961) Engine won't Start

Backfire out of the carb----severe timing issue----look for a sheared flywheel key. The flywheel nut needs to be tightened to 100-105 ft-lbs using a torque wrench.
Not being able to turn the flywheel does not sound good....
 

comrad.12357

Cadet
Thread starter
Joined
Jul 8, 2012
Messages
8
Re: Johnson RDSL-23 (1961) Engine won't Start

Flywheel key is good. The Flywheel nut is tightened down to 100 ft-lbs. The flywheel does turn, but it is very difficult to do and the electric starter is unable to turn it...
 

HighTrim

Supreme Mariner
Joined
Jun 21, 2007
Messages
10,486
Re: Johnson RDSL-23 (1961) Engine won't Start

How did you unfreeze it.
 

jb93

Petty Officer 1st Class
Joined
Feb 21, 2008
Messages
267
Re: Johnson RDSL-23 (1961) Engine won't Start

You say it turns by hand, so I take that means the locking problem only occurs when you use the starter...is that what you meant? If so, is it possible the starter bendix is binding in some way? Pull both spark plugs so you can turn it easier by hand. Are there any grinding noises when you turn it by hand? You can easily remove the bypass covers and take a look at the piston/rings to see if you see any damage, stuck rings, etc.
 

Mohawkmtrs

Chief Petty Officer
Joined
Jan 13, 2010
Messages
571
Re: Johnson RDSL-23 (1961) Engine won't Start

Spark plug wires going to the proper cylinders?
 

Chinewalker

Fleet Admiral
Joined
Aug 19, 2001
Messages
8,902
Re: Johnson RDSL-23 (1961) Engine won't Start

The fact that you say you got it unstuck, and the additional issue of it re-sticking after the "pop", tells me you have some significant internal issues. I would not try to run it at all until I've had the powerhead completely apart for inspection of the internals.
 

boobie

Supreme Mariner
Joined
Nov 5, 2009
Messages
20,826
Re: Johnson RDSL-23 (1961) Engine won't Start

Agree with Mohawk + 1............
 

comrad.12357

Cadet
Thread starter
Joined
Jul 8, 2012
Messages
8
Re: Johnson RDSL-23 (1961) Engine won't Start

The spark plug wires are going to the correct plugs... We have reset the points...rebuilt the carb...We now believe that it is the electric starter not having enough torque to turn the flywheel... were having it looked at and when it gets back I will get back to you...
 
Top