Johnson lower unit shifter connection

[brownde]

johnson 48hp 1996 dropped lower unit to replace water pump. After a ***** getting the shifter rod undone replace pump ok. but in the process I screwed up the lower shifting rod connection to the propeller shaft. Am I out of my element? should I take it to a professional to get it reconnected? Any advice would be appreciated>>
Dave

 

[boobie]

Re: Johnson lower unit shifter connection

Go to shop.evinrude.com and look at the parts diagrams. Maybe you'll get some ideas.

 

[brownde]

Re: Johnson lower unit shifter connection

Thanks but I have done that and I think I need to take it to a dealer. I dont' see how they can make the connection in that tight of quarters. Thanks again

 

[mark1961]

Re: Johnson lower unit shifter connection

Sometimes its a matter of removing some componentry to gain access.....

What type of top connection does the shiftrod have?

 

[boobie]

Re: Johnson lower unit shifter connection

If you haven't got the right tools to work on it, it may sometimes be best to take it to a dlr. If you don't have a lot of 1/4 " drive tools and flex sockets , it can be a real bear.

 

[brownde]

Re: Johnson lower unit shifter connection

Thanks guys I have taken it to a dealer. word to the wise... They told me never remove a phillips screw in the housing it is what keeps the lever in tack with the gears.. Thanks again
Dave