Johnson 90 To 140 Conversion

vincentrubble

Recruit
Thread starter
Joined
Aug 4, 2015
Messages
1
I'm a newbie to the engine conversion/upgrading scene. I've got a Johnson 1981 J90TLCIM that runs like a top but it's mounted on a heavy 17'-6" Canaventure so let's nicely say it isn't very quick to get up on step and absolutely brutal if you're the poor sod whose trying to ski behind it.

I've compared the parts lists for both the 90 and 140 and have all parts on hand for the conversion but I'm a little terrified of buggering up a perfectly great running motor.

Any hints or thoughts that anyone can offer to help push me over the edge on this project?

wired247 - anything you can help me out with on this please?

Thanks in advance, John
 

jimmbo

Supreme Mariner
Joined
May 24, 2004
Messages
14,699
What prop are you running, and what is the top rpm you are getting? Your engine makes its best power around 4700 - 4800 rpm, but to get better holeshot, propping it for 5500 is acceptable, even with the HP drop off above 5000 rpm

The 90 to 140 is doable. but not cheap. Different porting, carbs, heads, exhaust tuning are some but not all differences. But you might find the 90 had better low end than the 140, of course the 90 will run out of breath at higher rpms when the 140 is really starting to inhale. The best solution for towing with a heavy boat, is a V6. There you have a 50%+ increase in displacement, and the boat will leap out of the water compared to a 140
 

interalian

Commander
Joined
Jul 23, 2009
Messages
2,105
I did exactly what you want but started with a 140hp donor motor and a good bottom end from my old 90. You need the 140 block for its porting and for the modified exhaust channels - can't just bolt 140 stuff on your 90 block. Link to my build is in my signature.

For the record, the 90 popped out of the hole very well on my 1500 pound tin boat (loaded with fuel, driver and motor), but the 140 feels like it wants to rip the transom off and will actually blow the prop out on some launches. I'm very happy with the change. It even uses less fuel when dragging skiiers or tubes around.
 

flyingscott

Fleet Admiral
Joined
Apr 8, 2014
Messages
8,348
The easiest way to make that conversion is to buy a different motor. The 140 was re-rated to a 115 hp when prop ratings came in. So any of the 1985 and later 110/112/115 motors will be the same thing and cheaper.
 
Top