Johnson 88spl won't run long

BassBoatNewbie

Cadet
Thread starter
Joined
Apr 26, 2016
Messages
10
My outboard wouldn't start for a while, so it was suggested that I clean the carbs. I ran some carb cleaner through it and got it running, but only momentarily. Last time I ran it on the lake it did the same thing, even before the cleaning until the point it wouldn't start. It'd run for 8-10 seconds and then die off. I've had a few ideas bounced around to me. One that I need to completely take the carbs out and clean them. The other being that the fuel pump needs to be rebuilt. I'm looking to see what everyone here thinks I should start with. I trust this forum and the advice a little more than I do from random people. If that makes sense.
 

Crosbyman

Admiral
Joined
Nov 5, 2006
Messages
6,298
carb cleaner in a carb only cleans it's surfaces not it's internals passages .... why not do a good job and dismantle them to clean them properly

​ manually pump the fuel pump .... it see if the "engine's" fuel pump is toast ....... if the engine runs good the fuel pump circuit needs servicing

​test compression also , check ignition when failing (heat related issue)
 

Chinewalker

Fleet Admiral
Joined
Aug 19, 2001
Messages
8,902
I agree - if you just sprayed some carb cleaner into the carbs on the engine, you didn't clean the carbs... Pull 'em, take 'em apart, clean 'em, and rebuild 'em with new carb kits.
 
Top