johnson 6 hp outboard power head

markrohrer

Cadet
Thread starter
Joined
Oct 15, 2017
Messages
23
Hello all,i have a 1960s hydromite that came with a 6 hp Johnson out board power head,my question is will a bigger power head have same bolt pattern
 

racerone

Honorary Supreme Mariner
Joined
Dec 28, 2013
Messages
40,028
The older 7.5 had the same bolt pattern, different gasket.------nothing else fits.
 

Chinewalker

Fleet Admiral
Joined
Aug 19, 2001
Messages
8,902
The 7.5s were built 1954 to 1958. As racerone pointed out, it'll bolt up, but the water passages are configured differently, so the gaskets are different. Not sure it'll work with your application without having the two powerbeads side-by-each and checking them closely, comparing to the passage holes in your adapter plate.

That said, with a Hydromite, I doubt you'll get feel of a power boost between the two. They were never intended to be performance rigs, but more aimed toward water parks and the like to putt around with. Motor and prop in the front, too, so even if you did get it on plane, it would probably lose bite any time you hit a wave.
 
Top