Johnson 50 hp tilt trim

john100-50

Recruit
Thread starter
Joined
Mar 28, 2016
Messages
3
I have a 50 hp Johnson, year 2000, Model No. 50JPLSSM. The tilt will partially work if you press the button and pick up on the motor at the same time. It will go up slow. As soon as you let off on the button it drops back down to the bottom. This unit has only about 100 hours or less on it. Hasn't been run in the last three years. The guy never used the tilt on it that much when he did use it. Any ideas on what the problem might be? Thanks.
 

Crosbyman

Admiral
Joined
Nov 5, 2006
Messages
6,298
search utube for maintenance videos.... internal valves must be shot causing a leak down
 

john100-50

Recruit
Thread starter
Joined
Mar 28, 2016
Messages
3
I have read some of these. I just thought no more than this has been used that the valves should be ok. Can they be stuck open? In other words does that oil get old enough to make them hang up?
 

Fed

Commander
Joined
Apr 1, 2010
Messages
2,457
Make sure the manual release valve is securely shut & also check the fluid level before thinking about rebuilding it.
 
Top