Johnson 1973 50HP 50ESL73R Starting Problems

McKiddy

Recruit
Thread starter
Joined
Nov 1, 2016
Messages
1
I can't get my motor to start with the controls. It will start and run when I throttle it manually on the engine but will not start using the warm up lever on the controls. The linkage appears to be working properly. I'm wondering if it might be out of adjustment or something. Does anyone have any experience with this type of problem?
 

gm280

Supreme Mariner
Joined
Jun 26, 2011
Messages
14,605
:welcome: to iboas McKiddy...

So you say you can make adjustments at the engine and it will start and run, but can't make adjustments from the remote controls and have it start and run. When you move any of the remote control levers, does the engine change adjustments. If so, I don't see any reason for it not to start and run. But if the remote control doesn't change things at the engine, then you have issues with the control cable(s) or even the remote control unit itself. Verify you can make throttle adjustment when you move the throttle at the remote control unit. That would be my first thing to verify. JMHO
 

racerone

Honorary Supreme Mariner
Joined
Dec 28, 2013
Messages
40,028
Is the choke on OFF at the motor ?-----Is the choke in the automatic position at the motor ?-----Does the choke solenoid click when you operate it ?-----Do you have the owners manual ?
 
Top