JJ wellcraft
Recruit
Thread starter- Joined
- Jan 28, 2016
- Messages
- 1
Any help ....
So let me start this way. I just got a 99 wellcraft with a Johnson 150 outboard. Here are the symptoms and what's been done so far.
Symptom - when your in the water, the boat will start but run rough. Sometimes when you put it in gear it will just die. If you can manage to get it above say 1,500RPMs it will rev out just fine come on a plain and run about 5200 RPMs. Most of the time it just wants to die.
What's been done ?
Compression check - all cylinders checked at 110-115 psi
Changed spark plugs - yes the right ones for the boat .
Checked spark - have spark on all 6 plugs - however when hooked up to the water hose, you can pull the plug wires off and 1-5 cylinder will drop down and come back when wire is hooked back up, the #6 cylinder when you pull the wire makes no difference.
Pulled the carb off associated with #6 and all looks good...
Tried moving the coil to see if the problem followed, it didn't ! It stayed on #6.
So let me start this way. I just got a 99 wellcraft with a Johnson 150 outboard. Here are the symptoms and what's been done so far.
Symptom - when your in the water, the boat will start but run rough. Sometimes when you put it in gear it will just die. If you can manage to get it above say 1,500RPMs it will rev out just fine come on a plain and run about 5200 RPMs. Most of the time it just wants to die.
What's been done ?
Compression check - all cylinders checked at 110-115 psi
Changed spark plugs - yes the right ones for the boat .
Checked spark - have spark on all 6 plugs - however when hooked up to the water hose, you can pull the plug wires off and 1-5 cylinder will drop down and come back when wire is hooked back up, the #6 cylinder when you pull the wire makes no difference.
Pulled the carb off associated with #6 and all looks good...
Tried moving the coil to see if the problem followed, it didn't ! It stayed on #6.