johnson 15 hp worn ignition?

mitchellbrink81

Cadet
Thread starter
Joined
Jun 13, 2012
Messages
7
hi,

i just came across an johnson 15 hp for sale. the guy selling it says that the motor has worn ignition and that you cant fix it.
he says that the crankshaft got worn and with new ignition it should work but eventually will die again because it will get to hot.
becasue of hitting the flywheel.

i have never heard of this problem before so i think ill get it going again easy. did someone ever hear of this problem? i wont get it if its true off course.
thanks in advance.

the year is around 1980 and it has cdi ignition.

grtz mitchell
 
Last edited:

Bosunsmate

Admiral
Joined
Apr 7, 2012
Messages
6,135
Well if the flywheel has too much play it would cause an issue but then you could just replace the bearing up top.
If the motors getting too hot id suspect impeller/thermostat, blockages as the culprit
 

F_R

Honorary Supreme Mariner
Joined
Jul 7, 2006
Messages
28,226
At least the seller is honest. Don't buy it unless you want to rebuild the powerhead ($$$$)
 
Top