Is it okay to (post glassing deck cleaning question)

bear_69cuda

Commander
Joined
Oct 10, 2008
Messages
2,109
Is it okay to hose down the engine, bilge area, everything... Just wash all the grinding debris, dust and crap out the drain? Should I be concerned about wiring harness, trim pump, or any thing else? I basically want to hose out the entire boat... (I will cover the carb) Any recommended general purpose cleaner/degreaser for engine and bilge? Simple green?

Obviously my effort at covering the engine did not work well... :(
 

Attachments

  • jse_08MAR09_030.jpg
    jse_08MAR09_030.jpg
    71 KB · Views: 0

mthieme

Captain
Joined
Oct 6, 2007
Messages
3,270
Re: Is it okay to (post glassing deck cleaning question)

I do it every spring. I use Gunk. Depending on the age and condition of everything, it is not impossible to have a problem or two afterwards. Avoid direct contact with the distributor. Even better, put a plastic bag over it as well as the carb.
 

Bob_VT

Moderator & Unofficial iBoats Historian
Staff member
Joined
May 19, 2001
Messages
26,108
Re: Is it okay to (post glassing deck cleaning question)

Try some S100 Motorcycle cleaner ....WOW is it good stuff and will not hurt wires and stuff. You spray it on and hose it off and it does a great job. I have used it on motorcycles, atvs and car engines.
 
Top