NJOutlaw25
Recruit
- Joined
- Sep 20, 2012
- Messages
- 1
Here is the information that I can provide. Boat is a 2006 Baja Outlaw, original 496HO motor with 125 hrs and I'm the original owner. Just about 1 month ago the engine started to act up, I would be cruising and all of a sudden the engine would cut out and loose power and will only run at idle. If I try to give it throttle it sputters and at that point it seems like it's no longer running on all 8 cylinders. If I turn of the ignition key and start the boat back up it's fine, I can go again and it will be fine until the random issue begins again.
I've owned this boat for 5 years without so much as any problems, it's regularly maintained with new fluids, spark plugs, etc..
I took my boat out this past Sunday and this series of events (running good and then cutting out, turning off the key and restarting it) happend about 5 times over the course of 45 minutes.
So I have a few questions..
1 - Does this motor have a diagnostic scanner for the ECM, is it like the OBD2 for a car or something different? Also where is it located on this 2006 motor?
2 - Anyone else have any experiences like this?
Thanks in advance for any help!
I've owned this boat for 5 years without so much as any problems, it's regularly maintained with new fluids, spark plugs, etc..
I took my boat out this past Sunday and this series of events (running good and then cutting out, turning off the key and restarting it) happend about 5 times over the course of 45 minutes.
So I have a few questions..
1 - Does this motor have a diagnostic scanner for the ECM, is it like the OBD2 for a car or something different? Also where is it located on this 2006 motor?
2 - Anyone else have any experiences like this?
Thanks in advance for any help!