Installed new battery and now gauges do not work...

GoHogs

Recruit
Thread starter
Joined
Apr 15, 2011
Messages
2
I installed a new battery and now my gauges or my switches or lights do not work. I assume that I have a blown fuse or fuses, but I can't find the fuse box/panel to check. I have a 1992 Harris pontoon boat. Thanks for any help that you may have.:confused:
 

jamiemac74

Seaman
Joined
Feb 13, 2011
Messages
61
Re: Installed new battery and now gauges do not work...

Make sure you have all the wires hooked up on the battery. Sometimes they will have a separate battery lead for stuff like that... Just a idea, I could be wrong in this case...
 

Ob1415

Seaman
Joined
Mar 15, 2011
Messages
71
Re: Installed new battery and now gauges do not work...

Or perhaps your switches have breakers on them? If so, there should be reset buttons for them, usually on the panel where the switches are located. Just a thought. Good luck.
 

Fireman431

Rear Admiral
Joined
Sep 17, 2007
Messages
4,292
Re: Installed new battery and now gauges do not work...

More than likely you left off a power wire (12v+) that feeds the dash. Check around & under the battery for a red wire with a terminal end that isn't hooked up.
 
Top