First time posting but long time lurking...
I recently had to replace my ignition switch because it was falling to peices. I ordered a Seadog Line 420383(-1) from Iboats and im having some troubles getting it wired in and working. I was hopeing one of you guys may be able to help me out...
Here's the switch wires:
Yel/Black - Choke (connects to Grey wire on cable)
Black - Magneto Gound (unsure where to connect)
Black/Yel - Magneto Circuit (unsure where to connect)
Purple - Ignition Circuit (unsure where to connect)
Yel/Red - Starter Solenoid (connects to Yellow wiire on cable)
Red - +12v (connects to Red wire on cable)
Here's the cable wires that goes to the motor:
Red - +12v
Black - -12v
Grey - Choke
Yellow - Starter Solenoid
Brown - Unsure
White - Unsure
Orange(maybe salmon) - Unsure
Its a Mercury 115hp motor on a 1985 17.5' Procraft.
I recently had to replace my ignition switch because it was falling to peices. I ordered a Seadog Line 420383(-1) from Iboats and im having some troubles getting it wired in and working. I was hopeing one of you guys may be able to help me out...
Here's the switch wires:
Yel/Black - Choke (connects to Grey wire on cable)
Black - Magneto Gound (unsure where to connect)
Black/Yel - Magneto Circuit (unsure where to connect)
Purple - Ignition Circuit (unsure where to connect)
Yel/Red - Starter Solenoid (connects to Yellow wiire on cable)
Red - +12v (connects to Red wire on cable)
Here's the cable wires that goes to the motor:
Red - +12v
Black - -12v
Grey - Choke
Yellow - Starter Solenoid
Brown - Unsure
White - Unsure
Orange(maybe salmon) - Unsure
Its a Mercury 115hp motor on a 1985 17.5' Procraft.


