I’m in the measurement business. You would be amazed at how many customers (experts) spend big money for instrumentation with far better performance than needed to met their need with little to no ROI
In that line of thinking…given the wide range of recommend WOT rpm and that most props are only available in 200 rpm increments, how accurate do the speed and rpm readings need to be to prop a boat?
What speed device do you recommend to met the accuracy criteria knowing “over the water” speed devices are notorious for speed and linerity issues?
Don’t you need a anemometer input as well?
Would you not remove or minimize any effects of current by simply running your test across the current?
From a practical stand point, what does a “performance curve” buy you other than a nice graph to display?
In the olden days I ran a performance curve as baseline data on a new boat. My reasoning was twofold. First to optimize the prop pitch, and secondly to review data annually to see if I was losing performance, and thus needed a tuneup.
Back then I was lucky enough to live where boat races were common, and had a measured mile. I DID have a tach, accuracy unknown. Another 26 mile course with a 6 gal tank would allow me to check fuel usage every time I made a change.
The measured mile course was run up and downstream, and then averaged. The water wasn't wide enough to go across current.
OK, all rudimentary "equipment", but it was all I could afford. Today, GPS for speed, VesselView for fuel usage and rpms. We've come along way, baby....LOL.
I do measuring stuff too. Back when I was a young Engineer we used an analog watch and a bucket to calibrate plant systems. "Control" was made by sight and feel, usually by manually turning a water faucet handle. Was it good enough? Maybe, we made and sold product. Now we have PLCs and everything is computer controlled. ROI? You betcha.
Is a $300 VesselView cost effective? I dunno. However, the very first time I used it, just as I was looking at the dial the temp spiked and I shut her down in a hurry. Turned out I picked up a floating plastic bag. Raised the outdrive and the bag fell off. In my mind, THAT made the sensor worth every penny.