Impeller

Tom french

Cadet
Joined
Sep 26, 2021
Messages
25
Hi, my first attemp at changing the impeller on my AQ231a, from the picture is the current install correct, see photo of the impeller and cover plate.
Thoughts most welcomed.
 

Attachments

  • 8A526FDE-9828-4DDF-8F06-9165D7D84211.jpeg
    8A526FDE-9828-4DDF-8F06-9165D7D84211.jpeg
    2.6 MB · Views: 12
  • BEA30301-8A01-4E05-A8B8-CD184F3AA3E3.jpeg
    BEA30301-8A01-4E05-A8B8-CD184F3AA3E3.jpeg
    2 MB · Views: 12
  • 521BD554-C013-4C72-83B8-49B437110E95.jpeg
    521BD554-C013-4C72-83B8-49B437110E95.jpeg
    2.4 MB · Views: 10
  • 8C698611-F535-40A1-B70C-CB90A3A1BB68.jpeg
    8C698611-F535-40A1-B70C-CB90A3A1BB68.jpeg
    1.5 MB · Views: 12

Horigan

Chief Petty Officer
Joined
Jun 12, 2016
Messages
526
Looks fine, though I would clean up the surfaces that the seal contacts on both the housing and the cover. May want to pull the impeller to clean the housing. Compressing the impeller with a zip tie is an easy way to install it.
 

Tom french

Cadet
Joined
Sep 26, 2021
Messages
25
Looks fine, though I would clean up the surfaces that the seal contacts on both the housing and the cover. May want to pull the impeller to clean the housing. Compressing the impeller with a zip tie is an easy way to install it.
Thanks for quick response, ive now pulled it out and will replace. Also thanks for tip on replacing as it was hard enough getting the old one out.
 
Top