Impeller for 5.0 GL PEFS

[Rupp]

Guys,
I need to replace my impeller on my 5.0 GL PEFS. The last one a purchased was the correct Impeller but the round black oRing was slightly smaller on the new one than the one I took out and it leaked just a bit. Do any of you guys know the correct part number and does what I'm describing sound like any one else's experience.

 

[alldodge]

What is the motor serial number?

 

[Rupp]

I hope this is it. It's all I have in my notes and I store my boat at the lake.
4012014293

 

[alldodge]

I'm finding kit number 21951346

Used this site to look it up
https://www.volvopentashop.com/epc/en-US

 

[bruceb58]

I am getting part number 21951348. Maybe the same kit that Alldodge had too.

EF is the important part of the model number for your engine

https://www.volvopentashop.com/epc/en-US/Details/Part/21951348?catalog=PentaPartsCatalog&navigationProductId=7797478_018_r7&path=MarineGasolineEngines%2F7797478%2F7797478_26%2F7797478_018

 

[alldodge]

Thanks Bruce, can you clarify
the 1348 is impeller and O ring, where the 1346 is the O ring and 3 paper gaskets, right?

https://www.amazon.com/Volvo-Penta-Impeller-21951346-3862281/dp/B00KQ8DBKC

 

[bruceb58]

Thanks Bruce, can you clarify
the 1348 is impeller and O ring, where the 1346 is the O ring and 3 paper gaskets, right?

https://www.amazon.com/Volvo-Penta-Impeller-21951346-3862281/dp/B00KQ8DBKC

His pump only uses the o-ring...the paper gaskets aren't used.

The 1346 is a kit I actually used on my belt driven Volvo pump. It is used for many versions both belt driven and crank driven whiuch is why it comes with paper gaskets as well as the o-ring.