ignition problem

dan72240z

Recruit
Thread starter
Joined
Sep 9, 2011
Messages
2
I have a mid to late 60 mercury 650 65 hp.
wires from motor are Red - rectifer
yellow- start solenoid
white- pos off bat.
pink- magneto
black- neg off bat.
gray- choke

my new ignition switch has post labeled A- accessory
B- battery
C- choke
M magneto
S- start solenoid
M

I put yellow to S, white to B, Pink to M magneto, gray to c. My question is where do I put the red from the rectifer and the black for the ground. Ps. Found out It's a 1966.
 
Last edited:

dan72240z

Recruit
Thread starter
Joined
Sep 9, 2011
Messages
2
Re: ignition problem

I found a wiring diagram. Got it all wired. Black to the other M and red to B. I turn-on the key and it rolled over slow. Thought it might be the bat. So I hooked up a charger and let if sit for 20 min. Hit the switch. The starter wound up but didn't engage and the bat. Blew up. What happen? I thank its wired correctly .
 
Top