I'm bringing an 1981 starcraft back from the dead, it's got an 85 Johnson 90 v4 vro. Today I was tackling one of the many gremlins, I had a warning buzzer staying on constantly when I turned the key to on position. I've got OMC controls. I found the problem to be the two purple wires and the tan wire going to the warning buzzer where pinched together in the control housing so tight that the copper wires were showing from the insulation and touching each other. I pulled the two connectors off the terminals on the buzzer, and taped up the wires, then ground a little bit of the control housing to make extra clearance so they won't get pinched again. This fixed my buzzer problem, but while messing with it I accidently touched the connector with the two purple wires to ground and I seen it spark. After that I've got nothing.. No click, no engine crank, nothing.. could I have ruined something when I grounded those wires?