ignition problem, evinrude 1969 85hp help!!

augusto rivas

Cadet
Thread starter
Joined
Feb 24, 2015
Messages
9
Hi all, this is my second post on this forum. You helped me to solve a problem in the gear box of the evinrude 1969 85hp. Now I am having some difficulties in connecting the tachometer. What I know is that the electric signal is given by the alternator. But my question is, Can I get signal from the ignition amplifier? The engine has the original Motorola amplifier. It has a cable that connects to a terminal. Can this be used to get the signal? The tachometer I have normally goes connected to the negative pin of the ignition coil in a regular ignition system. But I tried to do this and it didn’t work. I ‘ll wait for your response.Thanks very much.




_sending photos to explain better
_possible tachometer signal cable?


2015-11-24 21.37.38.jpg
2015-11-24 21.32.55.jpg 2015-11-24 21.37.28.jpg
 

Attachments

  • 2015-11-24 21.37.38.jpg
    2015-11-24 21.37.38.jpg
    83.7 KB · Views: 0
  • 2015-11-24 21.37.38.jpg
    2015-11-24 21.37.38.jpg
    83.7 KB · Views: 0
Last edited:

F_R

Honorary Supreme Mariner
Joined
Jul 7, 2006
Messages
28,226
The motor as it came from the factory was wired to get the tach signal from the amplifier. But it required a special tachometer to read it. Not only that, I think many replacement amplifiers do not have the tach wire. Short story is use an alternator tach and be done with it.
 

augusto rivas

Cadet
Thread starter
Joined
Feb 24, 2015
Messages
9
thanks very much, I thought that could get the ingnition signal, for not change the original boat tachometer
 
Top