Idle control

jmw642

Cadet
Thread starter
Joined
Dec 26, 2011
Messages
8
Have a 1980 Johnson 7.5 outboard 2 cycle. Will someone explain how to use the slow idle control. Once its set for my elivation do I need to change it? Thanks guys for any help.
 

codykoke

Petty Officer 3rd Class
Joined
Jun 23, 2011
Messages
83
Re: Idle control

You want to seat the needle then back out 1.5 turns. Start the motor and slow down to troll all the while start to close the needle in 1/8 turn increments. Once it won't stay running back out the needle 1/4 turn. Within that 1/4 turn u should get the best setting. For better dirbections go to the top secret file and there's a tutorial there.
 

Daviet

Fleet Admiral
Joined
Sep 24, 2008
Messages
8,958
Re: Idle control

Are you talking about the idle control on the tiller handle or the low speed setting on the carb?
 

jmw642

Cadet
Thread starter
Joined
Dec 26, 2011
Messages
8
Re: Idle control

Are you talking about the idle control on the tiller handle or the low speed setting on the carb?

he low speed setting on the carb. Its right on the front of the unit.
 

Daviet

Fleet Admiral
Joined
Sep 24, 2008
Messages
8,958
Re: Idle control

codykoke is leading in the right direction.
Once you set it for your elevation, there should be no need to reset it.
 

jmw642

Cadet
Thread starter
Joined
Dec 26, 2011
Messages
8
Re: Idle control

Thank guys bet that will do it. Thanks again
 
Top