Idle Adjustments on 1997 Ocean Runner J175EXEUC

4TISQ

Cadet
Thread starter
Joined
Dec 6, 2014
Messages
18
I have replaced both carburetor/throttle assemblies with those from a J150EXEUC. except I did exchange the high speed jets. WOT it runs fine but having problem when idling and keeping it running; Idle speed is 800RPM. The needle adjustments has to be at least 8 to 10 turns open. My question is with the air orifices and how do they influence idling. Should they also be changed?
 

4TISQ

Cadet
Thread starter
Joined
Dec 6, 2014
Messages
18
I am guessing that a smaller air orifice will increase fuel flow through the needle valve. Any comments will be appreciated. Thanks.
 
Top