I thought I'd try this prop as a spare, and was test fitting it, and there is no way this can be right, yet I have all the right numbers according to the mfg web site. This is on an 2007 Alpha 135 3.0 sterndrive, and is a 21 / 14.25 RH prop.
I have the H1421 and the 31 hub kit.
The OEM prop has an inset in the prop where the thrust washer fits, and on the Hustler, the washer just sits on top of the hub kit. Therefore the prop sticks out half the width of the thrust washer, and hits the trim tab.
Anybody have and experience with this set up?
Thanks!
I have the H1421 and the 31 hub kit.
The OEM prop has an inset in the prop where the thrust washer fits, and on the Hustler, the washer just sits on top of the hub kit. Therefore the prop sticks out half the width of the thrust washer, and hits the trim tab.
Anybody have and experience with this set up?
Thanks!