Hummingbird wide 100

buckeye5

Recruit
Thread starter
Joined
Apr 8, 2012
Messages
3
I have hummingbird wide 100. I have power to the base of the unit where the unit snaps in, when I snap the unit in, I don't get power to the unit. Any suggestions?
 

John_S

Rear Admiral
Joined
Jun 21, 2004
Messages
4,269
Re: Hummingbird wide 100

There is a chance that the cable end is not all the way to the top. To test, remove cable from mount and plug direct into head unit. If it works now, re-assemble making sure the metal cable retainer is just below the plug.
 

buckeye5

Recruit
Thread starter
Joined
Apr 8, 2012
Messages
3
Re: Hummingbird wide 100

Thanks John_S
Checked that out and it still didn't work. I started to check into it more and I think it is a ground problem. I got it to turn on now but it won't turn off unless I turn off the main power panal switch. Any suggestion about getting it to turn off the way it is suppose to?
 

foodfisher

Captain
Joined
Feb 18, 2009
Messages
3,756
Re: Hummingbird wide 100

Corrosion is big time problem w/electronics, Check "every" connection/lead and look for a bent prong.
 

John_S

Rear Admiral
Joined
Jun 21, 2004
Messages
4,269
Re: Hummingbird wide 100

Thanks John_S
Checked that out and it still didn't work. I started to check into it more and I think it is a ground problem. I got it to turn on now but it won't turn off unless I turn off the main power panal switch. Any suggestion about getting it to turn off the way it is suppose to?

When you apply power, it should not turn on. The on/off switch(s) might be stuck or inoperative. Don't believe they are repairable. If that is the only issue, you can feed it via a panel switch.
 
Top