Bt Doctur
Supreme Mariner
- Joined
- Aug 29, 2004
- Messages
- 19,164
![DSCN3595_zpsvjho7uqq.jpg](http://i57.photobucket.com/albums/g219/BtDoctur/DSCN3595_zpsvjho7uqq.jpg)
![DSCN3594_zpsn1ksly9j.jpg](http://i57.photobucket.com/albums/g219/BtDoctur/DSCN3594_zpsn1ksly9j.jpg)
![DSCN3600_zps2n9ljrke.jpg](http://i57.photobucket.com/albums/g219/BtDoctur/DSCN3600_zps2n9ljrke.jpg)
locate the center of the pin ,can be done visually
![DSCN3596%20-%20Copy_zpsdto3cytz.jpg](http://i57.photobucket.com/albums/g219/BtDoctur/DSCN3596%20-%20Copy_zpsdto3cytz.jpg)
Drill in 3/8 ths of an inch with a #3 drill bit for 1/4 x 28 thread and tap .
![DSCN3598_zpsvoabnrlx.jpg](http://i57.photobucket.com/albums/g219/BtDoctur/DSCN3598_zpsvoabnrlx.jpg)
using a 3/64 drill bit CAREFULLY drill approx. 3/4 to 1 inch into the housing until the magnet picks up steel shavings.STOP DRILLING. Install grease fitting.inject grease until you see it between the steering yoke and transom.
![DSCN3602_zpslputctrs.jpg](http://i57.photobucket.com/albums/g219/BtDoctur/DSCN3602_zpslputctrs.jpg)
Last edited: