How can I test my VRO pump without running the engine

4TISQ

Cadet
Thread starter
Joined
Dec 6, 2014
Messages
18
I'm in the process of rebuilding the carburetors on my J175EXEU and would like to confirm if the fuel pump is working. I tried operating the pump with just the starter motor (no combustion) with no success. I'm assuming the pulse pressure was not enough to activate the unit. Any suggestions, anybody....thanks.
 

gm280

Supreme Mariner
Joined
Jun 26, 2011
Messages
14,605
Okay 4TISQ, are you trying to test the fuel pump or the Variable Ratio Oil pump? Because the title is about a VRO pump, but you talk about testing the fuel pump. :noidea:
 

racerone

Honorary Supreme Mariner
Joined
Dec 28, 2013
Messages
40,028
The pump should work with just the starter motor.-------For peace of mind you can take the VRO pump apart to inspect it, a very simple task.
 

daselbee

Commander
Joined
Jan 20, 2009
Messages
2,765
Sure the pump should pump gas at starter speed. Absolutely. Remove output fuel line, arrange a way to contain the fuel, and crank....you should get fuel spurts out of the pump.
 

4TISQ

Cadet
Thread starter
Joined
Dec 6, 2014
Messages
18
I did inspect the pump internally and everything appears to be in order.....all the chambers hold a vacuum so the diaphragms are okay. I was able to operate the pump with compressed air set at 60 psi and a blow nozzle to simulate a pressure pulse and the umit pumped fuel like crazy. I'll repeat the starter moter test
 

4TISQ

Cadet
Thread starter
Joined
Dec 6, 2014
Messages
18
I also should check the engine hose connection to make sure is no blockage.
 
Top