House Battery wiring diagram

bentleyboats

Recruit
Thread starter
Joined
Jan 5, 2012
Messages
3
I have a 88 Tollycraft 30 Sport Cruiser. The original wiring has the house battery tied to the starboard start battery. There is a large isolator with a 3 bank charger. I'm in the process of moving and separating the start batteries. I have plenty of switches and breakers. Does anyone have a fairly simple wiring diagram for setting up the house batteries? I'm running 4 6 volt golf cart batteries. I can do this myself, but I'm looking for ideas that work. And are simple. The alternators are 3 wire type. I have an inverter set up, but it's on a separate charger. Can the inverter batteries be charged off the isolator by the alternators?
 

M9.9

Petty Officer 2nd Class
Joined
Dec 4, 2011
Messages
155
Re: House Battery wiring diagram

You may want to take a FEW pictures of the various pwr setups and post them, as it seems you have a spider-web of things original and things added.
 

Silvertip

Honorary Supreme Mariner
Joined
Sep 22, 2003
Messages
28,772
Re: House Battery wiring diagram

I agree. Let's first understand "exactly" what you have. From what I've gathered you have the following:

1) One starting battery for each engine
2) One "house" battery tied somehow to one or both starting batteries.
3) A group of four 6 volt golf car batteries (2 sets of 2 in series which are then paralleled for the inverter).
4) A three bank charger (chainging what?)
5) An isolator (for what)

Not knowing how all of this stuff is wired or what "you" prefer the modified system to look like puts us at a disadvantage. Let us know what you want and we can make it work.
 

bentleyboats

Recruit
Thread starter
Joined
Jan 5, 2012
Messages
3
Re: House Battery wiring diagram

Thanks everyone. What I have is one start battery for each motor. One house battery now, but I have 4, 6v golf cart batteries for the house. They are part of the new install and wiring, not presently hooked up. The inverter has 4, 6v batteries and it's separated from all other systems. I want to charge those batteries when under way. There is a separate battery charger that's going to recharge the inverter batteries as well as the windlass/bow thruster battery.

Keep in mind this is an older boat and it's not up to ABYC standards. Anything I do will be. There are fuse blocks all over the boat in terrible places as far as access is concerned. We lost power to the fly bridge this summer and had a hell of a time finding the issue. It was a fuse in the closet behind the lower station. All those will be changed to breakers and installed in a panel that's labeled and right at the lower station. There will be another breaker panel installed on the flybridge as well.

I have been quite lucky with my parts search. We have a place in Seattle called Second Wave. I bought a gorgeous panel with over a grand in bits for $122.50. You can get just about anything you want or need there. Just a tip for my new friends here.

Thank you !
Bentley
 

Silvertip

Honorary Supreme Mariner
Joined
Sep 22, 2003
Messages
28,772
Re: House Battery wiring diagram

So you "will" have a total of eleven (11) batteries and you want to charge 10 of them from the engines. What size alternators are fitted to these engines?
 

bentleyboats

Recruit
Thread starter
Joined
Jan 5, 2012
Messages
3
Re: House Battery wiring diagram

Ok, I have to clarify. I have 4 inverter batteries, 4 house batteries (not yet installed), one start battery for each engine. Total of 10. I can see where I may have been unclear in my description. Right now there's 1 house battery, and it's going away. I'll have to check the alternators tomorrow, but I believe they're 135 amp.

Thanks for taking the time to find out what I have.

Bentley
 

Don S

Honorary Moderator Emeritus
Joined
Aug 31, 2004
Messages
62,321
Re: House Battery wiring diagram

That sure sounds like a lot of batteries to me. Most people have no problem with 2 golf cart batteries for house and inverter. To have 4 house and 4 golf cart is a lot for a 30' boat. What are you planning on running with that inverter? and what kind of loads on the 12V house batteries?


Does anyone have a fairly simple wiring diagram for setting up the house batteries? I'm running 4 6 volt golf cart batteries. I can do this myself, but I'm looking for ideas that work. And are simple.

One other note, with 10 or 11 batteries, there is nothing simple about it. You need to get everything on paper that you want, then figure out how to wire it, determine the proper size of cables, then convert the drawing to your boat.
 
Last edited:

Silvertip

Honorary Supreme Mariner
Joined
Sep 22, 2003
Messages
28,772
Re: House Battery wiring diagram

Ok, I have to clarify. I have 4 inverter batteries, 4 house batteries (not yet installed), one start battery for each engine. Total of 10. I can see where I may have been unclear in my description. Right now there's 1 house battery, and it's going away. I'll have to check the alternators tomorrow, but I believe they're 135 amp.

Thanks for taking the time to find out what I have.

Bentley

You also mentioned a battery for the bow thruster!!!!!!! That makes eleven. Again, you really need to give us a "plan". We can help with the connections but we need to know what your expectations are for this system and what sort of load each system must power. Make and model of the inverter and the three bank charger are helpful as well. "Load" means what devices (lights, radios, nav aids, etc) will each system be required to power. When it comes to charging all of these batteries think about your car or truck electrical system. Most today have 100 amp alternators to charge a single battery. It doesn't take much of an extra load to make that alternator work pretty hard. Now increase the demand by adding four more batteries to each engine on your boat and you can see why we are asking these questions.
 
Top