Hook up 2 wire trim motor to 3 wire controls

mgeistman

Cadet
Thread starter
Joined
Jul 29, 2016
Messages
11
Hi I'm new on here and looking for some advice. I just bought a evinrude v6 200hp I'm not sure of the year model but I believe it's in the 80's. I got it all hooked up and running good but I'm having trouble hooking up the trim controls. The motor is a 2 wire(blue and green) and the controls that came with it have 3 wires(blue, green, and red). I tried hooking it up using a solenoid and no luck. It would click but not move the engine up or down. Next I was gonna try hooking it up using 2 relays but was looking for some advice before I did all that wiring and it not work. Is it possible to hook up a 2 wire motor with 3 wire controls? Oh and the trim motor does work if you just hook it straight up to a battery. Thanks in advance!
 

mgeistman

Cadet
Thread starter
Joined
Jul 29, 2016
Messages
11
This is how I hooked up the solenoid.
 

Attachments

  • image.png
    image.png
    98.1 KB · Views: 0

Faztbullet

Supreme Mariner
Joined
Mar 2, 2008
Messages
15,938
Got to get the relay box as on a 2 wire unit 1 wire is - and other is +, the flip flops to run othe direction...
 
Top