Hey guys new here and could use some help.

Rsword

Recruit
Thread starter
Joined
Apr 2, 2018
Messages
3
Hey guys I picked up a 1986 Aqua Patio 18' toon with a 86 Evinrude 30 hp motor. I rebuilt the carb last year replaced/updated the primer valve. Starts and runs good if 1/4 throttle or more. Does not want to just put around the lake it will die, Now the low speed mixture needle is worn on the tip but I can not find the part ant where at all. Every where says it is a discontinued part? Any info on where to get one??
 

racerone

Honorary Supreme Mariner
Joined
Dec 28, 2013
Messages
40,028
Pictures of the tip?-----Any other trouble shooting done other than blaming the carburetor ?
 

Rsword

Recruit
Thread starter
Joined
Apr 2, 2018
Messages
3
No picks as it is 3 hrs away at my cabin in Northern MI still snow on the ground and ice on the lake. Has 120 in each cylinder, has good spark, I rebuilt the carb as the person I got it from had never done it and it was running poor very poor. Like I said all is good now but the low idle. the tip of the needle is worn very thin and has a ever slight bend in it, how it got there I do not know.
 

Rsword

Recruit
Thread starter
Joined
Apr 2, 2018
Messages
3
Just south of Houghton Lake, little lake called Elbow Lake.
 

Sea Rider

Supreme Mariner
Joined
Sep 20, 2008
Messages
12,345
Which 86/30 HP model is it ? Check OB sticker somewhere middle leg if having one..

Happy Boating
 

Scott Danforth

Grumpy Vintage Moderator still playing with boats
Staff member
Joined
Jul 23, 2011
Messages
53,416
parts are still available for every johny-rude ever made. just have to look a bit harder (or pay a bit more)
 
Top