HELP!!

kstilwell

Recruit
Thread starter
Joined
May 15, 2016
Messages
4
I made a bad mistake this morning, and wasn't paying attention. As I was backing my car out of my driveway, I backed into the back of my boat. Obviously I wasn't going fast, but I hit it enough to leave a dent in the back of my car, and I also shift the boat on the trailer pretty badly. The trailer was chocked so that didn't help either.

I guess what I need to know, is how badly I could have messed up my prop or engine. The skeg is slightly bent. The engine is an old '68 Evinrude.
 

fireman57

Captain
Joined
Aug 24, 2004
Messages
3,811
If you didn't bend or break a blade on the prop you probably didn't hurt it. Check your transom though for cracks if you moved it on the trailer. shift the engine manually and see if it goes in and out of gear properly.
 

kstilwell

Recruit
Thread starter
Joined
May 15, 2016
Messages
4
Thanks for the quick response fireman. Dumb question, I am new to the whole boat ownership thing...What do you mean when you say shift the engine manually? It looks like the skeg probably took the most of the force, I just want to make sure i don't have issues when I put it in the water.
 

fireman57

Captain
Joined
Aug 24, 2004
Messages
3,811
Just shift it and walk back and make sure the prop is engaged. shift to the other gear and make sure it engages. you don't have to have the engine running. I am assuming that it is in neutral now so it should spin freely until you shift it.
 
Top