Help

Steve Brugmans

Recruit
Thread starter
Joined
Jul 9, 2003
Messages
3
I have just aquired 2 18hp Fast Win Evinrude motors Ser# 18002C80110 I believe they are from the mid 1960's. They have not been used in a couple of years. I am not very knowledgeable on motors, does anyone have any tips before I try and get these going?
 

ob

Admiral
Joined
Aug 16, 2002
Messages
6,992
Re: Help

18002 are 1970 model 18 hp engines.I recommend getting a service manual as your first move in resurecting these beauties.Before doing any pull roping and attempting to turn engine over ,make sure cylinders are prelubed with some TCW3 oil.
 

wikelam

Chief Petty Officer
Joined
Apr 21, 2003
Messages
543
Re: Help

get manual<br />change plugs<br />clean gas<br />new gear oil<br />lube cylinders
 

MajBach

Chief Petty Officer
Joined
Jun 21, 2003
Messages
564
Re: Help

I've only been a member of this board for a few weeks now and I'm amazed at how often a post regarding a 18hp Fastwin of your model year comes up. Actually, I suppose I shouldn't be since I've owned one since 1968 and it has proven itself to be the most indestructable internal combustion engine I have ever owned. I've had mine stripped apart on two occasions and feel I know it inside and out. Feel free to ask anything anytime. BTW, even though I've had the outboard in pieces on my workbench, I've only ever changed the coils twice, the impellor 2 or 3 times, the gearcase once (ran it without oil-duh)and the fuel pump once. It might be a loud and smelly engine by today's standards, but you've got yourself one dependable motor!
 
Top