Help wondering what model boat and motor

mattyp84

Cadet
Thread starter
Joined
May 16, 2012
Messages
9
Hey i was wondering if someone can help me figure out the model of my boat and motor size. I know the boat is a 69 larson but i dont know what model. Also 1337370647669.jpgboat.jpgboat2.jpgthe motor is a v6 but dont know the make.
 

southkogs

Moderator
Staff member
Joined
Jul 7, 2010
Messages
15,134
Re: Help wondering what model boat and motor

Dunno' about the Larson model name/number, but she looks to be around a 20'. Larson is still in business, so if you can find a HIN on the boat (usually transom or capacity plate) they might be able to help you out with more details. Take a measurement from bow to transom to get an idea of how long she is. Generally, boat model names wind up involving their length.

Your Sterndrive is an Electric Shift OMC, and if that's a '69 for sure then that should be a 155HP (Buick 225 V6).
 

mattyp84

Cadet
Thread starter
Joined
May 16, 2012
Messages
9
Re: Help wondering what model boat and motor

Thanks man for the useful info. I am new to the boating world. My father had this boat for alittle while and he just gave her to me. He does not know much about her either. So im trying to figure it out. She needs some of the floor replaced and there is a issue with the motor not wanting to fire up. I was told that the prev. owner had replaced the boots for the drive on the backside of boat and rebuilt the motor and drive like six years ago, but boat hasnt seen water since due to starting issue. Hope im not getting in over my head with this.

Ill try to find HIN And post back.
 

southkogs

Moderator
Staff member
Joined
Jul 7, 2010
Messages
15,134
Re: Help wondering what model boat and motor

Sounds like a lot of work for that boat. As a note of caution - Unless you've got a HUGE attachment to this boat, you may want to reconsider. The drive system on that boat is ages old. Parts are harder to find, and you can't put a new drive system into it due to the big ole' hole in the transom (you'd have to build and glass the whole rear end).

You can probably find a CHEAP restoration project with a Merc or outboard that you can re-power easier - or a lake ready boat for around $3k.
 

mattyp84

Cadet
Thread starter
Joined
May 16, 2012
Messages
9
Re: Help wondering what model boat and motor

The boats in pretty darn good shape for her age. The body is in really good shape no cracks or nothing, just some weak spots in the floor. the boots and bearing for drive have been replaced and the drive Has been rebuilt already same with motor. The motor turns manually but not by key think its wiring or starter maybe. If all else fails ill sell and invest in something newer..
 

MH Hawker

Vice Admiral
Joined
Jul 13, 2011
Messages
5,516
Re: Help wondering what model boat and motor

The soft spots in the floor mean your going to have to cut all of it out and put in new floor and stringers and glass work and because of the age and lack of parts you also will need to rebuild the transom and find and install a new drive at the last and or a new motor. Now all that being said your looking at from 2000.00 plus and several hundred hours of labor. And like southkogs said unless it has some huge sentimental attachment you will be a lot better off finding a boat in a lot better condition.
 

mattyp84

Cadet
Thread starter
Joined
May 16, 2012
Messages
9
Re: Help wondering what model boat and motor

I am New and just trying to understand why am i going to need new drive? drive and motor have already been rebuilt and have not seen water yet, all bearing and boots have been replaced too.
 

NYBo

Admiral
Joined
Oct 23, 2008
Messages
7,107
Re: Help wondering what model boat and motor

Welcome to iboats!:cool:

If you can get everything figured out, you may be able to get several years service from the outdrive. But those units are notorious for problems. And if you hit a log or something...:eek:
 

MH Hawker

Vice Admiral
Joined
Jul 13, 2011
Messages
5,516
Re: Help wondering what model boat and motor

The OMC drive you have , the company that made it has been out of bussiness for some time, 10 years I belive and parts are just about non existant. You may be able to get some use out of the motor right off hand I dont know it it will mate up on the newer drives. But in any event your 6 mounth to a year away from having the boat ready to go in the water. ANY and I mean ANY soft spots in the floor screams bad main structure intererty is lost, the floor is the last place it shows up and by that time the transom is shot the stringers are shot then the floor goes soft and when you crank up 150 horse power it can and dose rip the back off of the boat and sink.

Boats are not like wine aging kills them. I dont mean to be rude but its a money pit.
 

mattyp84

Cadet
Thread starter
Joined
May 16, 2012
Messages
9
Re: Help wondering what model boat and motor

No i understand! Was just hoping for the best. :(
 
Top