This is the 19' trophy with the wide center console. Only have 11" of clearance between the console and the gunnel. My T-top legs are going to be a real pain.
I am seeing the T-tops that bend to install on the sides of the console, but I am going to have to reinforce the fiberglass to hold the weight and stress of the top. I could also mount on the deck inside the console by using one of the gaff holes and cutting a hole next to the seat in the front of the console, however the deck below the console would also need to be reinforced.
How is this feat normally accomplished - thanks![IMG_1615[1].jpg](https://forums.iboats.com/data/attachments/403/403897-65ffb59492c86f671e4bdab61cb752c4.jpg "IMG_1615[1].jpg")
![IMG_1617[1].jpg](https://forums.iboats.com/data/attachments/403/403898-a2e49a02bd1d7902517b9998161ec848.jpg "IMG_1617[1].jpg")
![IMG_1618[1].jpg](https://forums.iboats.com/data/attachments/403/403899-cd6a3b836e5f9034a05bf292153e3534.jpg "IMG_1618[1].jpg")
![IMG_1619[1].jpg](https://forums.iboats.com/data/attachments/403/403900-cfa99cb3bd5709be70f959f5d45b8d3c.jpg "IMG_1619[1].jpg")
I am seeing the T-tops that bend to install on the sides of the console, but I am going to have to reinforce the fiberglass to hold the weight and stress of the top. I could also mount on the deck inside the console by using one of the gaff holes and cutting a hole next to the seat in the front of the console, however the deck below the console would also need to be reinforced.
How is this feat normally accomplished - thanks